Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us


Specification


Specification for HDPE Cover Blocks has been fixed as follows :
  • Cover Block should made of High Density Polyethylene (HDPE) & Low Density Polyethylene(LDPE)
  • Melting Point of cover Block should be in between 140 to 165 C.
  • Density should be between 0.90 g/cc to 1.10 g/cc.
  • Chloride Content (%) must not be more than 0.100.
  • Ash Content must not be more than 1.5%.

Specification for PVC Cover Blocks has been fixed as follows :
  • Cover Block should be made of Poly Vinyl Chloride.
  • Melting Point of Cover Block should be in Between 140 to 165 C.
  • Chloride Content % by mass must not be more than 0.100.
  • Ash Content % by mass must not be more than 16%.
  • Sulphate Content % by mass must not


Pioneers in HDPE/PVC Cover Blocks in India
  • Approved With Hindustan Construction Company(HCC) ltd group since 2012,Noida.
  • Approved With Tata project group since 2015,Noida.
  • Approved With Varaha infra group since 2015,Noida.
  • Approved With Garuda construction group since 2013,Noida.
  • Approved With Supertech group since 2014,Noida.
  • Approved With Anjara group since 2014,Noida.
  • Approved With Amprapali Group since 2014, first Noida line was built on our cover block.





Looking for Product Name ?